Installing the CTC hardware

BARR/NJE

Complete the following steps to configure the NJE CTC device.

  1. Install the CHANNEL-IN hardware and device driver.

If you are using a Bus & Tag connection, you will install the CHANNEL-IN (BT) adapter, Channel Attach Box, and cables. For CHANNEL INTELLIGENCE, you will install the CHANNEL INTELLIGENCE adapter and cable. If you are using an ESCON connection, you will install the CHANNEL-IN (ES) adapter, ESCON coupler (if needed), and fiber-optic cable A form of cable used in networks that transmits signals optically, rather than electrically as do coaxial and twisted-pair cable.

  1. Run hardware diagnostics to verify that you correctly installed the hardware.

See also: