To send LCDS Acronym for Line Condition Data Stream.
or Metacode A Xerox-generated data stream that provides all-points addressability
on Xerox centralized printers.
data to Xerox DocuPrint Enterprise Printing Systems (EPS) or DocuTech
2000 Series Production Publishers, you must configure the Spool
Window for routing documents to the spool printer. This is done by
adding the Dest. Device column
to the Spool Window,
specifying the destination device for the spool printer, and setting the
destination device for incoming documents.
Complete the following steps to configure the spool.
From the
Available sections list, select the Data
Set Header General Section.
From the Available
columns list, select the NDHGRMT Dest. Device field.
Click the right arrow (>) to add the field to the Visible columns list.
Arrange the column order
by selecting a field in the Visible columns
list and clicking Move Up and
Move Down. The first column in
the list displays as the leftmost column on the Spool Window. You can
also rename the column heading by clicking Rename.
When you have finished
selecting and arranging columns, click OK.
On the Spool
Window, click the Dest. Device
column for your printer. Enter the name of the queue defined on the Xerox
printer.
Use one of the following
methods to set the document's Dest. Device to the name of the queue defined
on the Xerox DocuPrint EPS. If the NDHGRMT field remains blank, the field
will be set to QUEUE when data is sent.
For documents received
with BARR/PRINT CHANNEL,
BARR/RJE, BARR/NJE,
BARR/FTP, or TCP/IP
socket, set the field manually on the Spool Window. Do this by clicking
the Dest. Device column for your
printer and entering the name of the queue defined on the Xerox DocuPrint
EPS. You can also create
an override table to populate the NDHGRMT
job header field automatically.
For documents received
with LPD, you can match the
queue name specified on the TCP/IP host to the queue name specified on
the Xerox printer.
For documents sent
with Print Utility, you can assign the value when
you send the files to the spool.
Right-click the printer,
and select Ready.
Right-click the document,
and select Ready.
You can save your Spool
Window column settings to a file by selecting View | Save
Settings As on the menu bar.
