This topic contains solutions to common problems that you might experience with BARR/PRINT390 for IPDS.
Cause: The adapter is currently being used by one or more connections. All connections using the adapter must be stopped before you can run hardware diagnostics.
Solution: Stop all connections using the adapter, and then run hardware diagnostics again.
Cause: The connection is started. You must stop the connection before it can be removed.
Solution: Remove the IPDS connection.
Cause: In order for any changes to an IPDS connection configuration to take effect, the connection must be restarted.
Solution: Restart the IPDS connection.
Cause: Parameter values are mismatched between PSF and VTAM.
Solution: Verify that parameter values are configured correctly for JES2, PSF, and VTAM.
See also: Configuration example for IPDS over SNA